|
MTTM
E-mail Update Sign-Up & Contest!
Sponsored
by: 
Here's how it works: Sign-up >>ONCE<<
below to start receiving the MTTM E-mail
Updates featuring info about parts, riding techniques,
hop-ups, etc. You will be automatically entered into
the monthly drawing for a prize. Winners will be notified
via e-mail and asked to verify their name by faxing
a valid driver's license or id card and provide an address
for the prize to be shipped to you from Minibike Outlet.
Please note that shipping to the winner will be covered
for the Continental U.S. only. Non-continental U.S.
and foreign shipping will have to be paid by the winner.
Other foreign shipping restrictions may apply.
And don't worry if you've already signed up, you are
already in the running for the drawing every month!
Note: When you subscribe, YOU MUST
provide your full legal name and e-mail address. You
may only sign-up ONE TIME and under only ONE
e-mail account. If you sign-up more than once,
under any circumstances, you will be disqualified
from the drawings. YOU MUST BE 13 YEARS OF AGE OR OLDER
to sign-up.
Privacy
Notice: Your information you provide below
may be used by both Minis to the Max.com and Minibike
Outlet to send you information via e-mail regarding
mini-bikes and peripherals. By signing-up for the e-mail
updates and contest below, you allow Minis to the Max.com
and Minibike Outlet.com to post your name as a winner
on the front page of this site and in any other forums
and advertisements.
Good
luck!
|
|
February Prize!
| DAI
ICHI Billet Oil Cooler |
Suggested Retail: $139.99
|
Oil Cooler Kit Dai Ich Oil Cooler
Kit is a high quality accessory
designed to help the Honda
horizontal engine keep cooler.
Air-cooled engines run hotter when
modified (i.e. big bore kits) and/or
subjected to heavy loads such as
racing use. This kit will help the
engine’s durability and reliability
by circulating the engine oil
through a cooler reducing the
engine’s oil temperature. The kit
includes the following: -
Lightweight aluminum oil cooler -
curved, radiator type for more
effective cooling over billet
coolers. - AN fittings - Crimped,
braided lines - NO hose clamps that
could easily come off or leak. - Two
different types of mounting brackets
- Right side cylinder head cover
adapter and two types of gaskets -
Mounting Hardware and roll of Teflon
thread tape |
|
|
|
|
